+91 94129 14843info@lakhirampaints.com
LakhiRamPaints&Hardware25 years of experience
Cart

Wood finish guide

Kamdhenu Kamolac Advance Wood Finish: Choosing and Applying a Wood Coating

A practical guide to wood finishes for doors, furniture and wardrobes: surface preparation, coats, drying time and care, with the Kamolac Advance video.

By the Lakhiram Paints showroom team, Dehradun·2 min read·Updated 6 October 2026

Paint Tutorials

KAMDHENU PAINTS TEXTURE

Watch product demo and installation guidance.

Wood finishes protect timber from moisture and wear, and they decide how a door or wardrobe looks for years. The video above shows the Kamolac Advance range from Kamdhenu Paints, and this guide covers the steps that matter whichever finish you choose.

Pick the look first

Decide how much of the grain you want to see. A clear finish shows the natural wood. A tinted or coloured finish evens out the tone on mixed or repaired timber. Gloss finishes look rich but show every scratch, while matt and satin hide wear better.

Prepare the surface

  1. 1Sand the wood with progressively finer paper, always along the grain.
  2. 2Remove all dust with a dry cloth, then a slightly damp one, and let it dry.
  3. 3Fill dents with a wood filler that matches the colour, then sand smooth.
  4. 4Mask hinges, locks and glass, or remove them before you start.

Apply the coats

  1. 1Apply the first coat thinly with a good brush, along the grain.
  2. 2Let it dry fully for the time on the can, then sand lightly with very fine paper.
  3. 3Apply the next coat. Most projects need two to three coats for an even finish.
  4. 4Allow the final coat to cure before heavy use, and keep furniture away from water for the first few days.

Use only the thinner recommended by the maker, and work in a ventilated space.

Dehradun conditions

Humidity rises sharply in the monsoon, which slows drying and can cloud a finish. Choose a dry day and allow extra time between coats during the rains. Doors that face the weather need a coating made for exterior use, so say so when you ask.

Finish the job with good hardware

New polish deserves proper fittings. See cabinet handles and a soft-close drawer system to match your refreshed furniture.

Related reading

Compare clear coatings in our Asian Paints WoodTech guide, or read about the Kamdhenu range in Dehradun.

Want a price or a shade or size recommendation? Message us on WhatsApp with a photo and the measurements, and the Lakhiram showroom team on Chakrota Road will reply with price, stock and Dehradun delivery time.

Frequently asked questions

Can I apply a new finish over old polish?

Yes, if you sand the old finish enough to remove gloss and any flaking, then clean the dust. Heavily damaged polish should be stripped first.

How long does a wood finish take to dry?

Drying and curing times differ by product, temperature and humidity. Read the label and allow longer in the monsoon.

Which sandpaper should I use?

Start coarser to remove the old surface, then move to fine grades for the final smoothing, always sanding along the grain.

Is a wood finish safe for children's furniture?

Check the product's safety information and let it cure fully, with the room ventilated, before use. Ask us about low-odour options.

Where can I buy it in Dehradun?

At our Chakrota Road showroom, or ask for a quote on WhatsApp for delivery.

Products mentioned in this guide

Prices change with stock, so every item is quoted on WhatsApp.

More guides